2004
Steorn: Orbo Webinar#1: 28.10.2015
Submitted by esaruoho on October 29, 2015 - 02:16Transcript by Esa Ruoho / http://lackluster.bandcamp.com/ / [email protected]
Pat: Welcome to the Orbo Webinar. We're here today to introduce you to the first Orbo product, the O-Cube. Orbo is a highly controversial technology ... (Shaun places the O-Cube on the table) ..and we're going to demonstrate the functionality of the O-Cube. Before we do that, however, we want to just give you a brief flavour of who we are and the journey that we've taken over the last fifteen years.
---
Archive.Org: The Pantone Story (2004)
Submitted by esaruoho on June 9, 2009 - 09:24- Auburn
- Bakersfield
- Hawthorne
- Illinois
- Michigan
- Pasadena
- Portland
- Price
- Reno
- Richmond
- Sacramento
- Salt Lake City
- San Francisco
- Saudi Arabia
- Seattle
- Tokyo
- Utah
- California
- New York
- USA
- 1966
- 1975
- 1980s
- 1983
- 1984
- 1986
- 1987
- Ali Rabashi
- carburetor
- Col. William C. Biederman
- David Pantone
- Dr. Andreas Kurt Richter
- Dr. Cavanaugh
- Dr. Harrelson
- endothermic reactor
- GEET
- hydrocarbon
- IRS
- Jason Pantone
- Molley Feichko
- Paul Pantone
- plasma
- plasma generator
- pollution
- Nikola Tesla
- 1930
- 1979
- 1990
- 1994
- 1995
- 1996
- 2003
- 2004
Energy From The Vacuum Part 08 Trailer - Challenging the Second Law of Thermodynamics (90 minutes)
Submitted by esaruoho on February 21, 2009 - 12:41PESN: Jeane Manning Reviews Viable Alternative Technologies
Submitted by esaruoho on December 3, 2008 - 03:11Speaking at the New Energy Movement conference in Portland, Oregon, Sept. 25, 2004, Manning described several technologies of promise to bring relief to the world's dependence on fossil fuels
by Susan M. Carter and T. Cullen Pure Energy Systems News PORTLAND, OREGON, USA
Jeane Manning, founding member of New Energy Movement and author of The Coming Energy Revolutions and Energie, said her goal was to make the New Energy field user friendly for the general public.
Paul Pantone: Paul's Comments About GEET FREE PLANS
Submitted by esaruoho on September 30, 2008 - 06:14from: http://www.youtube.com/watch?v=OXrHLNRmCOk
This is what I was remembering about what Paul Pantone said of the GEET Free Plans. This is why I tell people about better ways to make the GEET reactor.
Energy From The Vacuum Part 06 Trailer - "Inside Radiant Energy"
Submitted by esaruoho on September 24, 2008 - 22:28"Radiant energy, to me, what do I consider radiant, OK, what I consider radiant is the capturing of a spike, I consider that radiant. anything that, say, i generate, the radiant energy. "
Paul Pantone: Comment on CNET from Chris Piner, GEET tech: 50% gas 50% water engine modification
Submitted by esaruoho on September 20, 2008 - 00:00GEET technology, 50%gas50%water engine modification: reader comment from Chris Piner
Posted on: July 12, 2004, 7:34 AM PDT
Story: Energy heats up high tech
Paul Pantone has developed a system that Cracks the fuel down no matter the fuel or additives gasoline diesel old oil or even crude oil.. His invention called A GEET Global Environmental Energies Technology
He was awarded a Patent last Aug 19 1998 5,794,601 but could not get any in of the major media to tell the world
The GEET Fuel Processor is a self-inducing Plasma generator.
Paul Pantone: Salt Lake Weekly: Fuel Injected Lunatic
Submitted by esaruoho on September 19, 2008 - 22:57- Detroit
- Price
- Salt Lake City
- Utah
- California
- USA
- 1975
- 1984
- 2007
- Don Rosenbaum
- fuel
- George Gaboury
- George Gladic
- Jason Kirton
- John McBride
- Joseph Young
- Judge Hansen
- Justin Heideman
- Kuan Chen
- mileage
- Paul Pantone
- plasma
- Richard Hamp
- Rocky Pantone
- savings
- Steve Elswick
- 1950
- 1995
- 1996
- 1997
- 1998
- 2000
- 2003
- 2004
- 2005
- energy
- water
Fuel Injected Lunatic
Inventor Paul Pantone hoped to save the world. Now, will the world save him?
By Stephen Dark
Posted 07/26/2007
Led by a bailiff into Judge Royal Hansen’s 3rd District Court in West Jordan on June 7, Paul Pantone’s shuffling gait might have been caused by a broken big toe—gone untreated for more than year and a half—rather than by his wrist and ankle manacles.
Steve Windisch: Free Energy and the Open Source Energy Movement (Part 3)
Submitted by esaruoho on July 19, 2008 - 00:57- France
- New Zealand
- San Diego
- Utah
- Australia
- California
- USA
- 1963
- 1983
- 1989
- 2008
- Alexandra Correa
- Bob Boyce
- browns gas
- cold fusion
- Daniel Sheehan
- Dr. Harold Aspden
- Eric Dollard
- Eugene Mallove
- GEET
- HHO
- hydrino
- hydroxy
- Joel McClain
- LENR
- MRA
- Norman Wootan
- Paul Pantone
- Paul Zigouras
- Ravi Raju
- RLC
- RotoVerter
- Sharon Begley
- Steve Windisch
- water fuel cell
- watercar
- Yull Brown
- Peter Lindemann
- 1990
- 2002
- 2003
- 2004
- ether
- hydrogen
- orgone
- vacuum
- water
- ZPE
Going back to that optimum movement, we can dramatically improve modern technology
Submitted by esaruoho on July 9, 2008 - 22:34Designing the Next Golden Age
By Jay Harman
The following text is from a speech given at Bioneers 2004.
Welcome to the new Golden Age! Yes, here, today, right now, in what may feel for some of us like the darkest of times, we are creating a new Golden Age. I think we’re ready for this. We know, deep inside, that a better age for our world is absolutely crucial, and we know it’s possible. That’s why we continue to get up in the morning—to strive for a better world. For me, I know this new Golden Age is possible because of what I’ve learned from nature.
Nature.
Eugene Mallove's Open Letter to the World
Submitted by esaruoho on June 14, 2008 - 17:30- Harvard University
- israel
- MIT
- New Hampshire
- San Diego
- Toronto
- California
- Canada
- Ontario
- USA
- 1946
- 1961
- 1963
- 1965
- 1969
- 1970
- 1975
- 1980s
- 1983
- 1987
- 1988
- 1989
- 1991
- Alexandra Correa
- Arthur C. Clarke
- cold fusion
- Daniel Sheehan
- Dr. Harold Aspden
- Dr. Paulo
- Eugene Mallove
- fusion
- Galileo
- Herman Feshbach
- hydrino
- Julian Schwinger
- LENR
- Leon Lederman
- Percy Bridgman
- physics
- Richard Feynman
- Sin Itiro Tomanaga
- suppression
- thermodynamics
- Uri Soudak
- zero point energy
- 1993
- 1995
- 2000
- 2002
- 2003
- 2004
- electricity
- energy
- science
- vacuum
- water
- ZPE
Open Letter from Dr. Eugene Mallove
New Energy Foundation, Inc.
(A nonprofit 501(c)(3) corporation)
P.O. Box 2816, Concord, NH 03302-2816
Phone: 603-485-4700 Fax: 603-485-4710
www.infinite-energy.com
Universal Appeal for Support
for New Energy Science and Technology
by Dr. Eugene F. Mallove
President, New Energy Foundation, Inc.
Editor-in-Chief, Infinite Energy Magazine
Peter Lindemann: Reactive Power and Radiant Energy and John Bedini's materials
Submitted by esaruoho on February 27, 2008 - 12:26Nov. 7, 2004
Brett,
Glad to help. You are asking the right kind of questions. Here is my best shot at answering them.
1) My book consistently refers to the radiant spike LEADING the pulse.
That is true. The high voltage transient that leads the pulse is a much purer form of radiant energy. This circuit actually feeds this pulse back to the first battery in opposition to the forward current.
John Bedini: Reactive Power is the clue to Monopole, Hendershot, Moray..
Submitted by esaruoho on February 7, 2008 - 21:24- Alfred Hubbard
- branch
- coil
- compression
- current
- deep cycle battery
- Dr. Thomas Henry Moray
- electrostatic
- Gabriel Kron
- inductance
- Jerry Decker
- John Bedini
- Lester Hendershot
- monopole
- power
- radiant
- reactance
- reactive
- resistance
- transformation
- trigger
- voltage
- Nikola Tesla
- Peter Lindemann
- Tom Bearden
- 2004
- capacitance
- field
- pulse
- wave
The Tesla patent had to do with, how Tesla wound his coils and the special method used. As I was saying, the power termed as"free energy" is radiant in nature, and reactive when in use by us. The inter circles have put all these "skeptics" to work in all the chat groups and before that they were "disrupters". These people have nothing good to say about anything. After my 35 years of experiments with the term "free energy" and "over unity machines". This is what it turns out to be "Reactive power" and that's it.
PAX Scientific - Meet Viktor Schauberger
Submitted by esaruoho on April 17, 2007 - 17:31- MIT
- PAX Scientific
- Stanford University
- english
- USA
- ant
- Archimedes
- biomimicry
- bird
- cavitation
- centripetal
- fluid dynamics
- Gianluca Iaccarino
- Godfrey Mungal
- impeller
- Isaac Newton
- Janine Benyus
- Jay Harman
- John Ernst Worrell Keely
- Leonardo Da Vinci
- liquid
- noise
- propeller
- Rustum Roy
- Santhanam Shekar
- 2002
- 2003
- 2004
- 2005
- 2006
- cold
- engineer
- fish
- flow
- friction
- geometry
- heat
- mathematics
- nature
- pressure
- resonance
- spiral
- suction
- turbine
- vibration
- Viktor Schauberger
- vortex
- whirlpool
enjoy! if you can.
That Roundhouse
Submitted by cybe on October 19, 2006 - 15:09
Hello. Welcome to That Roundhouse. This is an ecohome of wood frame, cobwood and recycled window walls, straw-insulated turf roof, with solar power for electricity, compost toilet and reed beds for grey water. We designed and built it over the winter 1997/8, and it was turned down for planning permission several times. After several court appearances, we decided to demolish it over Easter 2004, but changed our minds after demonstrations of huge public support in its defence. The Pembrokeshire Coast National Park Authority attempted to get a court injunction to force us to demolish it, but were persuaded to allow it to stay up until July 2006, when we can re-apply under their new Low Impact Policy. Please browse around this site. Plenty of pictures, history and updates.
Keskustelu Rouva Ingeborg Schaubergerin kanssa
Submitted by cybe on October 14, 2006 - 11:53- Bad Ischl
- Linz
- Vienna
- Austria
- Dallas
- Europe
- finnish
- Germany
- New York
- Texas
- USA
- 1959
- astronomy
- communication
- Dr. Richard St. Barbe-Baker
- flume
- harmonics
- harmony
- Implementations
- industrial
- Ingeborg Schauberger
- interview
- Jane Cobbald
- Johann Wolfgang von Goethe
- Jorg Schauberger
- Kepler
- log
- Olof Alexandersson
- physics
- Pythagoras
- trust
- Walter Schauberger
- war
- Callum Coats
- 1924
- 1952
- 1958
- 2004
- introduction
- mathematics
- nature
- PKS
- pump
- spiral
- tree
- Viktor Schauberger
Rouva Schauberger on Walterin, Viktor Schaubergerin pojan, leski. Hän asuu yhä perheen kodissa Bad Ischlissä, pohjoisessa Itävallassa. Jokaisella tapaamiskerrallamme hänellä oli päällään perinteiset itävaltalaiset vaatteet, hyvin istuva räätälöity jakku ja dirndl-hame. Vaikka hän on alle 150 senttiä pitkä, hänellä on vaikuttava ilmestys ja hän on hyvin älykäs. Hän puhuu jonkin verran englantia, paremmin kuin minä saksaa, joten keskustelumme käytiin enimmäkseen englanniksi. Hänellä oli kuitenkin huolenaiheenaan se, ettei hän osaisi ilmaista itseään hyvin käyttämällä englantia, joten seurassamme oli tapaamisillamme myös tulkki. Keskustelumme aikaan hän oli 89-vuotias.
Kiitos että suostuit puhumaan minulle muistikuvistasi Viktor Schaubergeristä.
- Goethe puhui todellisuuden ja runouden erosta. Suuri runo voi kummuta todellisuuden pienestä siemenkodasta, ytimestä. Haluan kertoa todellisesta Viktor Schaubergeristä sellaisena kuin minä hänet tunsin. Nykyään ei ole enää monta ihmistä elossa jotka tunsivat oikean Viktor Schaubergerin.
- Tunsin Viktorin vain lyhyen ajan, vuodesta 1952 siihen saakka kunnes hän kuoli vuonna 1958. En viettänyt paljoakaan aikaa Viktorin kanssa. Walter ja minä asuimme Bad Ischlissa, hän asui Linzissä.
- Hän oli yksi merkittävimpiä 1900-luvulla eläneitä ihmisiä. Mutta siihen aikaan kun opin tuntemaan hänet, hän oli hyvin pettynyt moniin asioihin. Mikään ei muuttunut hänen elämänsä aikana;. hänen ideansa kiehtoivat monia, mutta harvat ihmiset pystyivät toteuttamaan ne käytännössä.
Schauberger-perheellä on pitkä traditio työskentelystä metsissä. Tekeekö kukaan perheen jäsenistä enää työtä metsien parissa?
- Viktor oli viimeinen. Hän oli varttunut Linzin pohjoisosassa, alueella joka on alkuperäistä metsää vielä nytkin. Tämä on harvinaista Itävallassa näinä päivinä. Hän oli sotilaana neljä vuotta ensimmäisessä maailmansodassa. Hän taisteli Venäjällä, Italiassa, Serbiassa ja Ranskassa, ja haavoittui. Sodan jälkeen hän työskenteli luonnonvaraisissa metsissä vuoteen 1924, sen jälkeen hänen uransa metsänhoitajana päättyi. Tämän jälkeen hän rakensi tukki-kouruja (log-flume) (hänen ensimmäinen keksintönsä, joka toi hänet laajemman yleisön tietoisuuteen), hänet kutsuttiin työskentelemään Wieniin. Hän oli viimeinen perheestään joka työskenteli metsissä. Nykyään kukaan ei tee sellaista työtä. Enää ei metsästetä ja kukaan ei myöskään työskentele enää luonnonvaraisissa metsissä.
Mistä Walter ja Viktor puhuivat?
Walter sanoi "Auta luontoa, auta puita. Meillä on pakko olla paljon enemmän puita, enemmän metsiä. Metsien ensimmäisenä tehtävänä on tuottaa vettä. Mitä me voimme tehdä luonnon hyväksi, mitä me voimme tehdä puiden hyväksi, ja mitä voimme tehdä puustolle ja vedelle kokonaisuutena?" Tästä hän aina puhui.
Tämä oli merkittävän teollisuuskasvunaikaa, niin kutsuttua saksalaisen sodanjälkeisen talousihmeen aikaa. Kaiken piti olla suurempaa ja parempaa. Viktor ja Walter olivat sitä mieltä, ettei suurempi ja parempi ole aina hyvästä. He sanoivat, että meidän pitää katsoa sinne, mihin asiat keskittyvät, mikä on olennaisinta, mikä on tärkeintä kaikelle elämälle. Viktorille ja Walterille tämä oli tärkein asia. Kuinka he pystyisivät saamaan tämän idean viestitettyä niin, että ihmiset pystyisivät ymmärtämään sen.
Nu Energy Industries
Submitted by cybe on December 31, 2005 - 20:16The transmutation of matter into electrical energy can be made to occur through the atomic dissociating power of high frequency radiant energy. The wavelength of radiant energy must be beyond the visible light-waves to harness the energy that is stored in ordinary matter. The process is more efficient and cleaner than what is presently in use today. It is virtually unlimited and is relatively free. This type of electric power generation is safer than any other known method of energy production. We need this free energy source now more than ever because we are running out of time. To keep informed of progress with this unique type of electrical power generation click here to subscribe to our Yahoo discussion group.
Jane Cobbald: Conversation with Frau Ingeborg Schauberger
Submitted by cybe on December 21, 2005 - 12:43- Bad Ischl
- Linz
- Vienna
- Austria
- Dallas
- english
- Europe
- Germany
- New York
- Texas
- USA
- 1959
- astronomy
- communication
- Dr. Richard St. Barbe-Baker
- harmonics
- harmony
- Implementations
- industrial
- Ingeborg Schauberger
- interview
- introduction. flume
- Jane Cobbald
- Johann Wolfgang von Goethe
- Jorg Schauberger
- Kepler
- log
- Olof Alexandersson
- physics
- Pythagoras
- trust
- Walter Schauberger
- war
- Callum Coats
- 1924
- 1952
- 1958
- 2004
- mathematics
- nature
- PKS
- pump
- spiral
- tree
- Viktor Schauberger

Walter said help "Nature, help the trees. We have to have many more trees, more woodland. The first task for the woodland is to bring the water into existence."
Frau Schauberger is the widow of Walter, Viktor Schauberger’s son. She still lives in the family home in Bad Ischl, upper Austria. Each time I saw her she was wearing the traditional Austrian clothes, the close fitting tailored jacket and a dirndl skirt. Although she is less than five feet tall, she has a powerful presence and shows a sharp intelligence. She speaks some English, more than my German, so our conversation was mainly in English. She was concerned that she would not be able to express herself well in English, so at each meeting we had an interpreter sitting with us. At the time of our conversation, she was 89 years old.
EDAV PROJECT - WAVEPLATE MECHANICS PART II
Submitted by cybe on October 11, 2005 - 21:36EDAV PROJECT
WAVEPLATE MECHANICS PART II
FEBRUARY 3, 2004
click here for EDAV Project Part l
click here for EDAV Project Part ll
click here for EDAV Project Part lll
>> click here for Waveplate Mechanics <<
Also, Victor S. especially noted that the waveplates be fabricated out of copper alloy material, with a silver coated anodizing. The egg shaped housing is also fabricated out of copper. So, of course the logical question is why. This will also be addressed in these writings.
To begin with, as you start the spin of the waveplates, you will create a vacuum of air to be sucked across the plates toward the outside diameter. This will now start a rotation of normal air molecules circulating counterclockwise around the inside of the enclosed housing. Now anytime you enclose circulating air mass in an enclosed chamber, the normal air friction between the air molecules and the housing will create heat. The recirculating air, spinning into itself creates no friction, so it is the subsequent impact that creates this heat. Heat always creates pressure. So now we have a building of pressure also inside the egg housing. The normal resistant air has to come from somewhere so a velocity cone is assembled into the center of the housing to direct incoming cool air into the spinning plates. See DIAGRAM 1. Now the air has to have an escape method so at the top of the egg housing and attached to the center mounted velocity cone is an exhaust turbine that is connected via the velocity cone back to the waveplates. As the heated air begins to build pressure, this pressure is naturally funneled into the exhaust turbine. The resulting pressure is now used to add velocity back down the cone into the waveplates. Now, the resulting airflow inside begins to increase in temperature to about 300-500 degrees F. within a few minutes.
This is where things begin to get interesting. The press formed plates after assembly create a waveform intersticial space. Both plates are maintained at a distance at the inside diameter and decrease in a uniformed distance all the way to the outside diameter. Now the exact spacing is unknown at this time. The slits cut into the upper plates let the outside circulating air get sucked into the area between the waveplates. Rotational velocity creates the suction or vacuum. So after a period of time we now have normal resistant air in the chamber getting very hot, and this air is being sucked right back into the waveplates. Lets take normal water and cool it to a crisp 42 degrees and now inject this cooled water into the center of the intersticial area. We will now create a normal thunderstorm to happen which I will denote as a natural endothermic reaction. Science describes an Endothermic Reaction to be: “Cold tries to take energy away from hot and creates an expansion of pressure”. Victor talks about this same thing on page 87-88, “Heat is first generated thru friction. The heat is immediately absorbed by the water and in the process a physical vacuum is created. Which then gives rise to the emergence of inner atomic rays. Due to the absorbed heat, the free dissolved oxygen still present in the water becomes aggressive owing to the present of the vacuum. Through the encounter of the mutually opposed, contra-directionally propagated, excited rays, the precondition for the marriage is created, the child of this union is organic, or cold light.
Now, not a lot of water need be injected to cause this to happen and if this water is atomized at the injection point, a better reaction is created. In between the waveplates we now have created a pressurized state to develop on top of the rotational vacuum. Whereby creating the repulsion state to come about.
Lets look at a normal garden hose. Usually a garden hose has about 40 lbs of pressure behind it to flow the water. By installing a squeeze nozzle at the end, the pressure in the hose builds, and when you squeeze the nozzle and inject all that pressure thru a very small orifice, a stream of water up to 20 feet is ejected. Now lets put this same analogy into the waveplates. We have produced now a pressure inside the waveplates that is vacuumed to the outside diameter by rotational velocity and now all is required is a small orifice around the outside diameter to create the repulsion energy. As the rotation increases, pressure increases, and when the repulsion effect happens the air molecules create their expansion on exiting the orifice at the outside diameter subsequently ejecting against the turbine blades which are cocked at a 30 degree angle. This results in a increase of rotation of the waveplates along with the expansion of air pressure up to 115 times. The ejection of the repulsed air will now also increase the pressure inside the egg housing increasing the pressure against the exhaust blades creating even more spin back into the waveplates. We now have created a living breathing motor, just as V.S. has talked about. By siphoning off the rotation of the center shaft and reducing the rpm thru a reduction drive now creates H.P. Rotational control can also be done by creating a mechanical devise to control the turbine blade angle to increase or decrease spin, Much like an adjustable pitch propeller on an aircraft.
But every engine will produce a by product from a reaction. Combustion engines that burn gasoline and oxygen produce carbon monoxide. The repulsion engine will produce a hydrogen byproduct, after separating the hydrogen molecule from the oxygen. But now this hydrogen molecule is being recirculated back thru the waveplates along with the normal resistant air and we may now create sub-atomic hydrogen. So now our calculations are changed from normal resistant air molecules to heated hydrogen ionized gas circulating around the egg chamber. A completely different set of temp/pressure/ vacuum equations are justified because of the now changing gas product.
Electrical emissions are also a by-product of this wonderful device. Since the waveplates are isolated away from the center shaft, a positive charge of electricity is going to build up on the waveplates. This is also explained by “When the hydrogen atom is caused to impact a copper atom at a high rate of acceleration, then the copper atom will capture the last remaining electron of the hydrogen atom”. This now creates the basis for ionized hydrogen or sub-atomic hydrogen.
A Hydrogen Ion: Having a kinetic energy of 1 electron volt, would have a velocity of 10.85 x 10(3) m/sec or nearly 6.1 miles per second (32,208 ft/sec. or 21,954 mph.). As long as ionized hydrogen does not combine with other gases like 02 it will be H or monatomic hydrogen. It will occupy twice the space of H2 and have twice the lifting power. (.014) Hydrogen gas on the other hand has a average molecular speed of 1693 m/sec or 5554.73 ft/sec @32 degrees F. or 0 degrees Centigrade. That is .07 lbs lift per cubic foot of gas.
The blue hue effect seen outside the egg housing is the formation of monatomic hydrogen which has lost its last remaining electron to the copper waveplates. This again is known well in the circle of science. Most cases of UFO sightings will talk about a humming noise or the blue hue noticed around the top of the circular vehicles.
The waveplates have to be isolated away from the center shaft, because this charge is not allowed to be grounded. Noticed, by more than one observer who has been able to create this effect is the strong static lightning bolts seen shooting out of the repulsion housing. These build up of charges can be captured and manipulated to capacitors and Static/AC/DC transformers for production into usable electrical current. This current can be used in operation of the vehicle or used to process electrical energy for residential use. Imagine running your repulsion system on the water supplied to your house. Static electricity is also the basis for electronic force fields.
V.S. wrote that on average, implosive forces are 127 times more powerful than explosive forces. Tesla’s 12” multi bladed turbine produced a possible 125 hp while Schaubergers 12” waveplates produced 1250 hp. (10 times more) Small implosion machines of 8” diameter rotating at 10,000 rpm. Can lift 57 tons and at 20,000 rpm. 228 tons.
So a 18” diameter should connect with repulsion energy at about 1500 rpm with an outside diameter velocity of 14,130 ft/min. or a speed of 282.6 mph. A total rpm range can easily exceed 10,000 rpm. So this could generate an enormous lift range totally incomparable to anything in existence even today. Air driven implosion machines specify air speeds of 124 mph. (124mph x 5280ft = 654720/60 min. = 10912/60 sec = 181.86 fps.
Wind velocity, must exceed this amount before repulsion happens. (pg. 134 fig.21) The greater the rpm, the more lift capability. So the 18” waveplate rotating at 10,000 rpm has an outside velocity of 1570 fps. Exactly how much lift capacity (suction), unknown. The actual volume of cubic feet of air moving thru the repulsion unit is staggering.
Hydrogen, being a by-product of the repulsion unit does not destroy the atmosphere like carbon monoxide. It actually enhances the environment.” The aeriform substances transformed in the machine create very high grade nitrogenous material which increases the vitality and germinating capacity of the vegetation”. V.S. PG. 116 Energy Evolution
Wave Frequency’s
Wave frequencies are also emitted from the repulsion unit upon entering the repulsion state. These frequencies are denoted to be in the 8 megahertz range. Much has been found regarding this information and will write more on this at a latter time.
Waveplate Technology
There are numerous ways of restructuring the waveplate system to cause many forms of energy to come about. I will explain several of these that were written in “The Energy Evolution” book.
QuasiTurbine
Submitted by esaruoho on October 6, 2005 - 12:32 The piston engine has been dominant for over a century.
Have we abdicated to do better?
And if better exists, are we going to give it a try?
Quasiturbine - A New Approach
An engine for optimum efficiency and clean environment
under any load, torque, pressure, flow, power or RPM !
The New Quasiturbine QT600SC pneumatic (click for more)
(The smaller sister QT75SC is shown on the right)
An Introduction to Vortices and Vorticity - vortex.pdf
Submitted by cybe on September 30, 2005 - 11:16Prof. A.H. Techet
Department of Ocean Engineering
Massachusetts Institute of Technology
Cambridge, MA 02139
To better understand the fluid forcing produced by fish when they are swimming it is necessary to first discuss the basic concept of a vortex and vorticity. A vortex arises when flow encircles a central point. Examples of where vortices occur in nature include: whirlpools, tornados, ocean eddies, blood flow through heart valves, and flow swirling behind rocks in a river current. Vortices appear in engineering fluid applications as well: flow around offshore platforms, tip-vortices from aircraft wings, helical vortices in propeller wakes and helicopter rotors. In general, vortices can form when flow passes any object with a non-streamlined shape or a sharp corner, and separates from the body.
Part 1B Engineering: Biological and Medical Engineering, Fish Swimming, Lecture 1 -2 - Trout_propulsion.pdf
Submitted by cybe on September 30, 2005 - 10:39- Login to post comments
China's farmers cannot feed hungry cities
Submitted by cybe on April 25, 2004 - 23:00Beijing - China's leaders have raised the alarm about their country's ability to feed itself as rapid development sucks land, water and people from the food-producing countryside into increasingly large and hungry cities. After a steady fall in grain harvests, the world's most populous nation recently became a net importer of food for the first time in its history, raising domestic political concerns and driving up international prices of wheat, rice and soya
World's Marine Life Is Getting Sicker
Submitted by cybe on April 3, 2004 - 23:00"...For years, apparent increases in illness among marine creatures, from whales to coral, have left marine scientists with the uneasy suspicion that the seas are increasingly plagued by disease. Now, US researchers have uncovered the first good evidence that they are right...."
- Login to post comments
An Unnatural Disaster: Global Warming to Kill Off 1 Million Species
Submitted by cybe on January 8, 2004 - 00:00Climate change over the next 50 years is expected to drive a quarter of land animals and plants into extinction, according to the first
omprehensive study into the effect of higher temperatures on the natural world.
- Login to post comments
