KeelyNet: Joel McClain: Calcium Decay and Alzheimers at 60Hz Scalar Resonance



Alzheimer's Disease, as we all know, is a progressive, incurable, debilitating illness, characterized by confusion and memory loss.

It normally affects older persons, whose bones have begun to decalcify,and who have been found to have higher than normal amounts of aluminun in their brain cells.

From the research of Dr. H.S. Lewis in the 1930's, we have learned that the resonant frequency of calcium is 120Hz. Walter Russell, in his resonance based Periodic Chart of the Elements, has shown that elements occur as "notes" on an octave.

Research by Les Brown of Canada has shown that elements decay in quantum steps, from the same note on one octave to a lower octave. In other words, zinc decays into calcium, which decays into aluminum, and the resonant frequency drops accordingly, from 240Hz, to 120Hz, to 60Hz. This is shown on Russell's chart as the E note, going from octaves seven to six to five.

Various means of resonating an element can cause the quantum decay, as demonstrated by Les Brown. Resonantly exciting an element increases the motion, friction and heat of the atomic particles, pushing the element closer to decay.

Every electrical power cord that is plugged into a wall outlet, whether it is conducting current or not, is emitting a scalar wave of 120Hz, which is exactly double the frequency of the 60Hz wall current. All AC powered electrical appliances, power lines, televisions, computers, etc., emit the same 120Hz scalar wave.

The human brain, comprised of two halves, is a scalar receiver. It is possible that the naturally occuring decalcification process is being unnaturally affected by exposure to artificially created scalar energy, hastening the decay of calcium into aluminum. This would become the onset of Alzheimers Disease.

If this is true, then there is also a cure, a sort of "fur of the dog" analogy, via resonating the aluminum to hasten its decay. This would be done through creation of a 30Hz AC signal, emitting 60Hz scalar energy, to eliminate the aluminum.

The aluminum would become lithium, which has been shown to have the exact opposite effect as aluminum, ie, increased awareness, heightened memory, etc.

This would seem to have a double benefit, in that the 30Hz AC would encourage a Beta state (see MIND13.ASC) to increase awareness, while the 60Hz scalar energy would help to reduce the aluminum in the cells.

I realize that there will be much opposition to this theory, as the 60Hz energy which we all use is so prevalent in our society. Because we have all been assured that it is "harmless" in normal radiation, we may not want to believe otherwise. We can at least begin to gather data, by asking the following questions:

1. Is the rate of Alzheimer's on a per capita basis the same, in both developed and undeveloped countries?

2. Is there any difference in the per capita rate between countries which use 60Hz current, and those who use 50Hz current?

3. Has the per capita rate of this country increased since the turn of the century, with the "electrification" of the nation?

4. Is the rate of occurance greater in areas which have more energy "in the air", such as along power line routes, around generating stations, etc.

More research is needed, obviously, but I believe that the potential is promising.

Joel McClain

May 6, 1994


Les Brown transmuted Zinc (240Hz) into Calcium (120Hz), then into Aluminum (60Hz).

Russell Periodic Charts lists Zinc as 7th octave, Calcium as 6th octave, and Aluminum as 5th octave. Aluminum is also listed as E-note.

What Joel McClain suggests in this article is that the calcium in our body is being affected by the 60HZ AC electricity, which he claims lets out a 120Hz scalar frequency. this 120Hz scalar frequency also happens to be the resonant decay frequency for Calcium - causing it to decay into Aluminum. Aluminum deposits are the cause of Alzheimer's disease, and therefore Joel McClain suggests that we generate a 30Hz AC signal, which would let out a 60Hz Scalar Frequency, which then would cause resonant decay in the Aluminum, which would then decay into lithium - which has the reverse effects to aluminum, i.e. increased awareness&heightened memory.

What we can deduce from this is that to combine the Russell Periodic Chart of Elements and these four frequencies would be a sensible decision. So let us do exactly that.

Starting with Zinc. Zinc is an isotope of Cobalt, in the 7th Octave, with the resonant decay frequency of 240Hz. It then decays into Calcium, which is no longer an isotope of Cobalt, but is closer to Argon, next to Potassium and Scandium, in the 6th Octave. the resonant decay frequency for Calcium is 120Hz, it then decays into Aluminum, going up to the 5th octave, next to Silicon and Magnesium. Joel McClain suggests that Aluminum can then be caused to decay using its resonant frequency of 60Hz, which will cause it to become Lithium (4th Octave), right next to Helium, Berylium, Boron and Carbon.

Resonant frequencies of elements (and their isotopes)

This whole subject (transmutation and the studies of Les Brown) is fascinating. I see cited in the text regarding calcium's decay into aluminum (as a component of the diagnosis of Alziemers Disease). Les Brown (reportedly) used a pyramid to transmute all three elements (Zinc, Calcium, Aluminum). While I understand that a standing wave of 240hz, 120hz or 60hz would have harmonics that would create the scalar waves that would (presumably) be at work to transmute the elements. It would make sense that Mr. Brown's pyramid would have a frequency of one of the harmonics of the 60hz family. It could be that the pyramid focused the existing wave front radiation from our energy grid. My main question is "how is it that Dr. H S Lewis came to assign these frequencies to these elements"? Is there a list somewhere that may cite the scalar harmonic frequencies of all elements??
It would be interesting to see how they corolate to Russell's Octave Table.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.