______________________________________________________________________________ | File Name : SASER.ASC | Online Date : 10/15/94 | | Contributed by : Bert Pool | Dir Category : KEELY | | From : KeelyNet BBS | DataLine : (214) 324-3501 | | KeelyNet * PO BOX 870716 * Mesquite, Texas * USA * 75187 | | A FREE Alternative Sciences BBS sponsored by Vanguard Sciences | |----------------------------------------------------------------------------| For those of you who keep your ear to the ground concerning "sound" technology, something interesting for you from the nets..... . . From: Mike Ficker To: Eric Berridge Msg #131, Aug-26-94 00:12:00 Subject: Re: Phonons . . -=> Quoting Eric Berridge to Mike Ficker <=- . EB> A phonon is usually thought of as the lattice vibration going through EB> a material. For instance, when a photon strikes the surface of, say, EB> some Gallium Arsenide (GaAs), a valence electron in one of those atoms EB> will absorb it. If the photon has more energy than required to knock EB> the electron into the specific energy level that it ends up in, then EB> the excess manifests itself in the kinetic energy of the e-. Excess KE EB> quickly radiates away, though, as a phonon. The phonon really is just EB> the disbursal of this excess KE; the adjacent atoms will absorb it and EB> pass it on, at the speed of sound through that material. . EB> You know how some opera singers can break wine glasses by mercilessly EB> screaming at them? (I think it only works for crystal glasses) That EB> is a result of sound going through the crystal at just the right EB> frequency to resonate. By supplying photons as above in just the EB> right way to a photosensitive crystal (Si, Ge, GaAs, AlP, InAs to name EB> a few), a resonance can be achieved in the resulting phonons. Then I EB> guess you would have a saser! . EB> Interesting. What are they being used for? EB> -eb EB> -!- FidoPCB v1.5 beta-'e' EB> ! Origin: Eye_on_Sky 510-443-6146 <<< RC-Telescope 4u2 use >>> EB> (1:161/708) . The saser is, for now, only in research. They use an inch long piece of glass chilled to almost absolute zero, to eliminate vibrations. The sound they amplified was at 340 Mhz, and it aplified at about 50%. The article also talks about using the device to search for Dark Matter. In talking about the aplication of using the device for the search for Dark Matter the article says "A dark-matter particle entering a piece of ordinary solid matter might, on rare occasion, hit an atom, make it vibrate, and create a faint sound." It then implies that the Saser could be used for this task. So what does that mean ? Later, Mike Ficker ___ Blue Wave/QWK v2.12 --- RemoteAccess * Origin: The Space/Time Continuum, Tacoma (1:138/179) ------------------------------------------------------------------------------ Vanguard Note.. Does anyone remember the 'weirding module' that was used in the movie DUNE? When the troops were being given their first demonstration of the device, it was explained that all masses have a resonant frequency, that organs such as heart, liver, lungs, etc. could be exploded when subjected to an amplified and sustained frequency resonant to their mass. That frequency was produced by the human voice and the 'signature' was in the form of words or sounds which particularly effected certain masses. Some of which resulted in great physical damage to the point of explosions. It was always of interest because a trained human voice has a wonderful range that can be used to harmonically tune to any mass. There are reports that the ancient Egyptians and other cultures (particularly the priests) had schools which allowed the priests to develop their voices for full control. The Egyptian priests were also said to have deep, reverberant voices. The Eastern Indians also used such 'signatures' in the form of mantras, and Vedic literature has many references to such 'acoustic geometries' which could be employed to evoke responses in mass. Molecular frequencies have also been used in an amplified cavity to produce a 'maser'. Ammonia and other molecules could be amplified to produce the resonant pattern in a reinforced condition resulting in odd effects when directed at certain masses. A PBS special once showed a short segment of a military test using a maser. This one was tuned to iron (ferrous or ferric oxide, I don't remember which) as its masing source. It was directed over a distance of about a mile at a steel plate something like twelve inches thick by 6 feet wide and 4 feet high. The maser was 'adjusted' (probably through phase matching) to establish resonance with the iron (ferrous oxide) in the target. In a matter of seconds, the entire steel plate EXPLODED into pieces. The principle was NOT just the intensity of the maser, but tuning to the resonant frequency of the iron, which by the way, does not occur in nature as an element but joins with oxygen and other substances to form various molecules, thus making it possible to use the maser to destroy the steel plate, just like the wine glass being exploded by voice. Perhaps this sheer destructive force is one reason you don't hear a lot about MASERS. According to Keely, the PHONON migration as mentioned in the file can be accelerated and NATURALLY AMPLIFIED by tuning the mass structure through the process Keely calls 'differentiation'. That is the removal of 'knots' that produce resistance to the flows of force through a mass. Once a mass has been 'differentiated', it is then considered to be harmonically adjusted and subject to manipulation of its internal energy flows. Super-conductivity and resonance are both LEVELS OF ORDER established in a mass which emulate this 'differentiation' process. ------------------------------------------------------------------------------ A sample of this month's (October) Roundtable mailout is provided so you can see how this would be applied to the real world to produce effects that we can use practically. ------------------------------------------------------------------------------ October 11, 1994 Notice of Vanguard Sciences Roundtable Meeting Greetings! This is your reminder for our 24th meeting of the Roundtable. Can you believe as of October, 94' this will be two years of monthly meetings? Something really amazing seems to be congealing in the minds of many people with whom we all have been in contact or read about. It relates to what appears to be a Universal Principle manifesting in nature as a CYCLOID. KeelyNet has long promoted the idea that geometry, frequency and spin are key elements necessary to achieve much of the phenomena we are trying to qualify and eventually quantify through a working and reproducible device. Victor Schauberger proved the Cycloid form was most easily created by use of an egg shaped flow pattern. Rudolph Steiner also said the heart shaped flow produced an inflowing, life-giving rotation which nature used when building new life, healing or accumulating energy. The life-enhancing effects can be augmented by using magnets, crystals, copper and other elements in the right combinations. Now, there have arisen numerous correlations in the field of inertial and gyroscopic drives from researchers such as Dean, Cook, Laithwaite, Kidd and Thornsen among others. One must realize that there is a difference between an inertial drive such as promoted by Dean, Cook and Thornsen and the precession effects of gyroscopic drives as investigated by Laithwaite and Kidd. In the case of inertial drives, the ideal system involves the creation of a cycloid motion, currently achieved by a complex mechanical rotation of one or more spinning weights. The simplest form is a spring with a weight attached to the end of it and mounted on a rotating disk. You can see how the weighted spring can be released at the same point in the rotation of the disk to give a hopping action in a single preferred direction. The spring slowly pulls the weight closer to the shaft as the disk spins away from the direction of the hopping motion, this allows the spring to 'recharge' during each rotation. The device then moves in short hops only in one preferred direction through the inertia of the moving weight when it is released at the same point during the disk rotation. In the case for gyroscopic precession, a perpendicular motion in relation to the angular spin of the gyroscope will also produce a lifting force against the weight of the gyroscope. The claims are that weight is not eliminated but reduced from its norm. It is felt that further research along this line will yield a levitating device. But the reason I'm writing about this, is because of a fascinating discovery made in Russia by Alexander Chernetski and tentatively called the PLASMATRON. (Refer PLASMAFE.ASC on KeelyNet) In our past meetings we have discussed MagnetoHydroDynamics (MHD) and the possibilities it presented as an over-unity device. An ionized gas that was 'supercharged' with high density magnetic flux seems to exhibit certain properties which Chernetskii claims to take advantage of. His description of the process; "The self-generating discharge (SGD) emerges when the discharge current reaches a definite critical density, when the magnetic fields they create ensure magnetisation of plasma electrons and they begin to perform MOSTLY CYCLOID movements. The interaction of currents with their magnetic fields forces the electrons to deviate to the cylinder-shaped discharge axis and the electrical field emerges. It has proved to 'switch on' the physical vacuum; in this field the vacuum is polarized and consequently the virtual pairs begin to move IN A DEFINITE DIRECTION, instead of chaotically. The current in the circuit builds up and additional energy is discharged on the resistor (that is) switched into the discharge circuit (load). Clearly, only part of the tremendous vacuum energy is extracted." Note if you will, once the cycloid pattern is achieved, a specific direction of thrust is generated to force all loose electrons to be thrown off at whatever happens to be in its path, in the Chernetskii case, an energy collector absorbs the energy and then switches out the excess energy to a load, such as a motor, light bulb or other device that performs a useful service. So, this is the same process as the inertial drive, except instead of using the rotation of a MECHANICAL part, we are using the spinning of the plasma, and instead of a weight, we are using a magnetic flux of a CRITICAL DENSITY. John Keely referred to the use of an apsidal motion as a means of crude propulsion as far back as 1893 and used it to PROPEL his airship in a demonstration to the War Department in 1896. Levitation is one thing, propulsion is quite another. Once you understand how the cycloid motion can be used in any rotating mass to produce a linear thrust, you can then extend it into microscopic reaches to help explain phenomena that borders on magic. Are not all molecules made up of atoms? And are those atoms not in turn made up of electrons spinning around a heavier nucleus? So, if you could put a dimple in the orbit of the electron in such a way that it would produce a minute off balance thrust, you would get a slight deflection as if you pinched a watermelon seed between your finger and it shot out. Of course, the amount of deflection will be very slight but can be amplified by adding to the 'weight' of the electron by increasing it's density. When it is released at the maximum eccentric position of the orbit, an inertial thrust is produced. Keely said that a mass could be differentiated and essentially tuned so that all components of it would become harmonized to each other. Once this was done, they all act as little tuning forks. Because they are so tuned, you can change the rotation or properties of one and THEY ALL CHANGE simultaneously. Thus, you could dimple one electron and all others would also dimple IN THE SAME DIRECTION to produce a MASS THRUST. You then have a way of moving mass without needing a transmission, something to react against or any visible means of driving it beyond the circuitry necessary to create the effect. This could lead to all kinds of new technologies if it could be realized as a prime mover. As you can see, the applications of the cycloid motion are manifold and ripe for further research. ------------------------------------------------------------------------------ The above mailer is part of what was sent out for this month's meeting topic. Norman Wooten brought over an article several months ago detailing experiments carried out by both Cook and Thornsen. We then were fortunate to meet both of them and witness a videotape made by Thornsen showing a plywood box powering a canoe across a body of water at a speed of 87 feet per minute, and purely through the inertial drive effect. An amazing thing to witness. But I won't drone on, it must mean something because Bert's PHONON article leads to so many other correlations. As usual, we here at KeelyNet would appreciate any information you might wish to share on this or other such interesting aspects of science. ------------------------------------------------------------------------------