______________________________________________________________________________ | File Name : HUMMEL.ASC | Online Date : 06/26/95 | | Contributed by : Jerry Decker | Dir Category : GRAVITY | | From : KeelyNet BBS | DataLine : (214) 324-3501 | | A FREE Alternative Sciences BBS sponsored by Vanguard Sciences | | KeelyNet * PO BOX 870716 * Mesquite, Texas * USA * 75187 | | Voice/FAX : (214) 324-8741 InterNet - keelynet@ix.netcom.com | | WWW Mirror - http://www.eskimo.com/~billb | |----------------------------------------------------------------------------| Though I had intended to get this online much sooner, serendipity has worked greatly in our favor by the delay. Mr. Stewart Harris' TOMI principle, Stefan Hartman's idea of shaping the field by use of angle irons on the end as well as the open contributions of others who have made the effort to duplicate Mr. Harris's fascinating discovery lend that much more credence to how such a device as described in this document can be 'self-driven'. (see TMIDEVIC, TOMIBILD, TOMIMOTR, TOMIFLAT on KeelyNet for background information) The following information results from a series of private discussions with certain individuals at a recent conference. In order to respect their privacy and confidentiality, no names will be mentioned. The information is so intriguing that I think it should not be witheld from those who research in the areas of anti-gravity or electrical flight...>>> Jerry/Sysop/KeelyNet ------------------------------------------------------------------------------ The Hummel Levity Disk While at a recent conference, I had the pleasure of meeting John Searl and John Thomas. For those who study such matters, you are no doubt aware that John Thomas has written a series of books recording details of the Law of the Squares and the Searl Levity Disk. These books are fascinating, and I PARTICULARY RECOMMEND the first in the series, Anti-Gravity, which sells for $25.00. For an excellent overview of the Searl claims, please download the file SEARLE3.ZIP from KeelyNet, it is an astounding piece of work excerpted from the book, "Anti-Gravity, the Dream made Reality", which John Thomas kindly allowed us to put online. The remainder of the books cover what Searl calls the Law of the Squares which Searl claims are necessary to produce anti-grav and free energy (and we suspect other effects) if properly applied. I am providing the address if you'd like to order the book or the entire set. During a conference, the greatest pleasure and sources of information usually arise from private or 'after-hours' discussions. During one of these, a friend and I were discussing Searl and some of the intriguing phenomena associated with his claims. This friend asked if I'd ever heard of a fellow named HUMMEL. I said no and he hesitated, then told me about this fellow up in Canada who had come up with his own 'poor man's' Searl disk using magnets that were essentially off-the-shelf. This fellow would provide me with no details as to the construction of the device but did relate an interesting story regarding some of the original experiments with the Hummel design. He said that the magnets were attached to radial spokes or arms that were jointed. These magnets floated in a magnetic housing which gave it the least resistance to air or friction. When the inventor built one of his early models, he was working in a backroom of his house. He got the machine finished about 2AM and gave it a slight spin to make sure it would spin freely. Being very tired, he went off to bed. A couple of hours later, he heard this tremendous crashing sound. Running to the workroom, he noticed his device was missing and there were pieces of plaster and rubble on the floor of the room. Looking up, he noticed a hole in the ceiling. The floating magnets, when properly biased, continued to spin, gaining momentum and speed with each rotation. Once it reaches a critical velocity, the disk achieves the same electrical field compression that Searl reports in his many reports of 'lost' disks and ends up taking off. Both the Hummel and Searl disks achieve the same tremendous electrostatic buildup on the outside rim. My friend would provide no further details on how this device was constructed, so I was left pondering what he said. In a later conversation with another fellow, we swapped some information and I asked if he'd ever heard of this mysterious Hummel Disk. He said sure, would you like to see how it works? Of course, I jumped at the opportunity. A rough diagram of the layout of the magnets which form the machine was drawn and it's operation explained to some degree. I've finally gotten it drawn up as HUMMEL.GIF if you'd like to study it. The principle is not only elegant but very efficient as to cost. Where Searl requires these special custom made magnets costing upwards of $10,000 EACH, the Hummel Levity Disk uses basically off the shelf magnets arranged in a certain fashion, as depicted in HUMMEL.GIF. Searl's magnets are composed of neodymium and other elements, specially arranged and constructed. As you read the following, please refer to the diagram HUMMEL.GIF for a better understanding. I still have some questions about how this thing works because not everything was explained to me. Hopefully as others study it, they will share their observations and we can all work collectively to figure it out and allow duplication. Imagine a hollow drum or cylinder, with magnets attached to the interior side walls and bottom. There are 3 discs composed of a series of magnets mounted on flexible sliding arms in a radial configuration. These are arranged in such a way that the disc floats on a cushion of magnetic repelling fields. The 3 disk assemblies are radial arms consisting of 3 magnets, one of which is attached on the inside arm tip, one on the middle of the arm and one on the outside of the arm. The middle of this arm has a flexible coupling which as far as I understand it can be compressed like a sleeve. The coupling allows the arm to bend at the middle, yet stays rigid in the horizontal axis to prevent the flipping of the magnets, this is necessary to sustain a repulsion. Thus, looking at it from the top down, you would see something looking like a bicycle wheel disk, having a series of radial spokes, connected to a central hub. There are 3 of these bicycle type disks, all balanced and floating in the air because of magnetic repulsion and contained within the confines of this drum. (I can't say for certain that the disks were mounted on a central shaft because the disks needed the absolute least friction from any mechanical coupling. The blinding velocities were achieved AS A RESULT of no friction. Nowadays, using a Meissner field to provide that magnetic repelling chamber would be a great improvement and probably be easier to reproduce, however I understand this device was built using off-the-shelf magnets!!) In the center of this apparatus and at the top, are two LARGE, high flux density magnets, separated by a screw thread (A & B as the Control unit in the drawing). When the top magnet is screwed down, it's repulsion field causes the lower magnet to push down and tilt sideways. This sideways repulsion then creates a repelling field that causes each of the floating arms to push down and around. Thus causing rotation and the disks spin. As far as I can tell, the flexible coupling on each magnet arm allows the 'burp' from the repulsion field against the top magnets, that would normally prevent free rotation, to move out of the way enough to allow the disk to get past this point, then it helps to repel on the opposite side when the arm moves back to its position. It is possible that the separation of the arms (equivalent to phase) would assist this motion. (this was written BEFORE Stewart Harris and his TOMI principle!) Once you start it, the rotation is slow but eventually builds up to tremendous speed because of the low-friction from the magnetic suspension. I would imagine the device would be quite dangerous at the high rotational velocities and so the magnets should be as securely fastened and balanced as possible. I showed this diagram to John Searl and he just raised his eyebrows, but said nothing about it. John Thomas said he was aware of this device but had no evidence of it beyond a description sent to him. I was also told that the disk acts EXACTLY the same as Searls', that is, as the velocity increases, it reaches a point where a tremendous electrical field is generated and only then does it take off and lose itself in the atmosphere. The apparatus was mounted in an aluminum shell similar to a flying saucer shape to allow accumulation of the electrical energy on the outside surface. When it was started from a takeoff position close to the earth, it would attempt to lift off the ground. Instead, lightning bolts would jump from the ship, grounding the craft to the earth due to the sapping of energy. Each time this happens, the energy would have to re-accumulate. Eventually, they learned how to overcome this to provide a sustained ascension. Hummel found that by using an insulated takeoff platform approximately 6 feet from the ground, he could completely prevent these lightning discharges from happening and got to a point where ascension and descension could be controlled in increments of one inch (so I was told). To prevent the craft from becoming lost, the control magnets that were attached to the screw thread to cause the downward repulsion, tilt and subsequent rotation, were controlled by an attached barometer. When the craft reached a certain reduced air pressure, it was expected to be too high up and possibly still rising. In order to prevent the craft from becoming lost in space as did so many of Searls, the reduced barometric pressure would cause the screw to spin up, thereby reducing the control magnet repulsion force, thus slowing down the spin and allowing the ship to come in for a controlled landing. This at least kept the ship from becoming lost and I assume they were visually tracked to allow retrieval. (So if you find one of these things, send it to us here at KeelyNet so we can study it!). Searl says he could never figure out how to control his craft and prevent them from taking off like this, until one day at a demonstration, he noticed the SPIN of the craft SLOWED DOWN when a video camera was aimed at the ship. It turned out that a scanning frequency emitted by the camera somehow interferred with the rotation or energy accumulation, possibly from resonant coupling with the material in Searls' compound magnets to cause them to reduce their spin velocity. After this fortunate observation, Searl says he could now control the spin velocity with a remote control circuit. There are several intriguing phenomena associated with Searl's disks, one of which is a vacuum that develops in the center of the spinning disk. There is also what appears to be an inertia-free field which also occurs in this central section. Searl's SEG (Space Energy Generator) uses this same principle except that it is used as a generator. The machine is prevented from reaching the critical velocity that produces lift by use of a 'governor', either mechanical or electronic, I have never seen details on how it was done. If rotating a metal mass causes electrons to be thrown to an outside receptive accumulator rim (as Searl claims), then those very high density electrostatic energies could be tapped directly (like a Wimshurst such as used in the Testatika and HYDE machines) OR the spin could be used to drive another generator. We will have more details on such devices and technologies as they are collected and typed up for distribution and study. Such information should not be held secret unless there are business or proprietary reasons. As far as I am aware, such is not the case with the Hummel device. After getting the details of this device, I again met the fellow who first mentioned this and showed him the diagram. He became very agitated and wanted to know WHO had showed me this and what I intended to do with it. He was not informed of my source but of course, it needed to be put online for those who study such matters. Almost like someone was sworn to secrecy or something. No further information was provided at that time nor has anything specifically about Hummel been learned since, although I have spoken with many people about it and no one has admitted to knowing anything about the man or the device. The entire project is kept extremely secret and only by invitation is anyone allowed to see a live demonstration or become aware of the technology. Hummel is supposed to live in Canada where he carries out his experiments in relative privacy. Those who study UFOs will note the claims of some kind of experimental base in Canada, believed to be related to French absorption and continued research into the Nazi Kugelblitz technology from World War 2. If Hummel is the actual source of these mystery sightings, we might be all that much closer to nailing down some of these spook technologies to practical experiments as this file and most KeelyNet files are intended to promote. Well, this is an important piece of information that everyone who studies alternative flight or power principles needs to know about. I am sure there are more details out there that we hope will also be openly shared once this gets distributed to our various Associates. I have since learned there is a video and/or computer program that shows how this machine is constructed and operates, I know the person who has the computer animation, but he won't talk and was upset that any of this was about to 'hit the pavement'. There are still private demonstrations of this machine that are periodically held in Canada to attract financial backers and support. I will persist in trying to get the animation and any other details on the Hummel Disc if at all possible. If you try building this device or any modification of it, we would appreciate the sharing of your experiences with all of us here at KeelyNet. The fact that the machine can not only be used to produce electrical flight but also as an energy generator system makes it important that everyone study, correlate and experiment with these principles. We should do whatever we can to make this a reality. As you will see by studying the TOMI information, a positive thrust CAN be produced which could easily explain the self propelling attributes of the Hummel and Searl machines. Just keep in mind that the extremely high velocities needed to funnel the electrons to the outside rim, will require a balanced arm assembly for safety. There has been other information gathered, one in particular from a Russian source which is being compiled into a file that might help in research in this area. It indicates experiments showing the earth as being POSITIVE instead of negative in polarity, which, if true, will change much of our understanding of how terrestrial and atmospheric electrical energy operates. Be careful, think before you build, ask for advice from others, collect whatever other information might be helpful and share your findings. ------------------------------------------------------------------------------ The other books are listed in a file on KeelyNet called SEARL.ZIP. Antigravity: The Dream Made Reality by John Thomas........ $25.00 SHIPPING AND HANDLING: Book/Surface Rates LOCATION FIRST ITEM EACH ITEM ADDITIONAL United States................$3.00.................$1.00 Canada/Mexico................$4.00.................$1.50 All other Countries..........$7.25.................$2.50 1st Class/Priority/Air Rates United States............$5.00.....$2.00 Canada/Mexico............$5.50.....$2.50 All other Countries Call or write for postage cost New York residents add 8% sales tax. Make all checks payable to.....John A. Thomas Jr. 373 Rock Beach Rd. Rochester, New York 14617-1316 ------------------------------------------------------------------------------