(word processor parameters LM=8, RM=75, TM=2, BM=2) Taken from KeelyNet BBS (214) 324-3501 Sponsored by Vangard Sciences PO BOX 1031 Mesquite, TX 75150 There are ABSOLUTELY NO RESTRICTIONS on duplicating, publishing or distributing the files on KeelyNet except where noted! February 15, 1992 HYDEHATH.ASC -------------------------------------------------------------------- This file is from the July/Aug/Sep 1991 ELECTRIC SPACECRAFT JOURNAL P.O. BOX 18387 Asheville, North Carolina 28814 Subscriptions are $24 for USA, $29 for Canada/Mexico and $39 for other countries. All subscriptions must be in US dollars. Electric Spacecraft Journal is an interactive platform addressed to those doing creative research and experiments in electric and magnetic technologies useful for spacecraft, and to those interested in the subject. Its goal is to help individuals to communicate and cooperate, both formally and informally, and to encourage individual capabilities. -------------------------------------------------------------------- Vangard Note... Though ESJ has only been in publication for three issues now, we find it most stimulating and informative. The best part is that the authors actually DO experiments and document them in the articles so that the readers can try it themselves. This can lead to many other ideas for experiments as seen through the diverse perspectives of others. THIS MAGAZINE IS WORTH SUBSCRIBING TO IF YOU HAVE A PENCHANT FOR EXPERIMENTATION! -------------------------------------------------------------------- Page 41 Network Notes Information from : George Hathaway 39 Kendall Avenue Toronto, Ontario Canada M5R1L5 Hyde Generator Report George Hathaway has built the electrostatic portion of the Hyde generator. He explains : "Between stator segments we only saw some 10 volts P-P when excited by up to 5,000 volts on the 'Excitor' end plates and operation at up to 4,000 rpm with an 8-1/2" diameter rotor. Page 1 This was unaffected by gap distance between excitor plates (and the) rotor, as well as adjustment of the commutator. Hyde states that he has seen up to 300 KV between rotor segments! Either he still is withholding some information from the patent, or has been fooling himself. His little diode/capacitor circuit for stepping down high voltage is useless, as shown in the patent, [US Patent # 4,897,592 as reported in out last issue, Ed.] (listed on KeelyNet with diagrams as HYDEGIF) for doing what Hyde claims. In fact, I believe that only an actively-switched voltage divider will do what he claims that circuit should do. My tests have been witnessed by two others, an engineer and a physicist. My device has 24 stator and 12 rotor segments each side." -------------------------------------------------------------------- The following is taken from Moray Kings paper regarding the Hyde device and listed on KeelyNet as ZPE3. It shows that Hyde has gone beyond his patent specifications. -------------------------------------------------------------------- The rotors in the patent description were electrically connected by brushes to their adjacent stators, BUT HYDE HAS SINCE IMPROVED HIS INVENTION HIS INVENTION BY REMOVING THESE CONTACT (66). The field from the excitor plates induces a polarization between the connected rotors. The segments on both rotors are aligned to allow them to shield an aligned pair of stator segments. As the rotor spins, aligned stator segments are ALTERNATELY EXPOSED and SHEILDED from the excitor polarization field. Each stator segment is electrically connected to its counterpart on the other stator through a PULSE RECTIFIER CIRCUIT in which the transient voltage pulses are stepped down and then channeled to a combining rectifier output circuit (not shown). It is a surprise that such a simple device as Hyde's could output anomalous power. An analysis using just classical physics would predict that the voltage induced across a stator segment pair would swing between zero and the excitor plate voltage since this is the steady state limit for the shielded and exposed conditions. This is observed when the rotor is spun slowly. However, when the rotor is spun on the order of 6000 rpm, a 3 KV potential across the excitor plates yields stator pulses in excess of 300 KV with a very small drag on the rotor (67). -------------------------------------------------------------------- The following is from the Hyde Patent (listed as text only under HYDEPTNT on KeelyNet or with .GIFs and text as HYDEGIF) : -------------------------------------------------------------------- It was therefore found that working embodiments of the present invention require less than ten percent of the electrical Page 2 output energy for the mechanical input. Further, ACCORDING TO ONE PROTOTYPE model of the invention, a relatively high output voltage of 300,000 volts was obtained across the stators. By reason of such high voltage, an output circuit 30 having a voltage reducing and current multiplying attribute as hereinbefore described was selected so as to render the system suitable for many practical applications. -------------------------------------------------------------------- Of course, inventors who seek patents do so with the hope of financial recompense for their efforts, that is the primary inducement to seek the patent in the first place. Put yourself in the inventors place as to just how much detail you would place in a patent open to public access for the price of $1.00? Patents are SUPPOSED to be written with sufficient detail that anyone "skilled in the art" would be able to duplicate the invention. It would be very helpful if the inventor would provide full details and possibly a video showing his device in operation. That video could then be sold for extra income. He could additionally offer detailed plans if he wanted confirmation that his device worked from independent sources. This would further accelerate interest in the device and no doubt lead to vast improvements in the technology. As in the HYDEOFFR file on KeelyNet, the lawyers have been empowered to offer a non-negotiable, non-exclusive license for 5 million plus $2 per machine produced. Since the inventor is in hiding due to threats against his life, the only contact possible is through the lawyers and possibly Moray King. We will continue to keep you posted on what goes on with this particular free energy device based on our sources of information. -------------------------------------------------------------------- If you have comments or other information relating to such topics as this paper covers, please upload to KeelyNet or send to the Vangard Sciences address as listed on the first page. Thank you for your consideration, interest and support. Jerry W. Decker.........Ron Barker...........Chuck Henderson Vangard Sciences/KeelyNet -------------------------------------------------------------------- If we can be of service, you may contact Jerry at (214) 324-8741 or Ron at (214) 242-9346 -------------------------------------------------------------------- Page 3