______________________________________________________________________________ | File Name : EMPWEAP.ASC | Online Date : 12/21/95 | | Contributed by : Bill Beaty | Dir Category : ENERGY | | From : KeelyNet BBS | DataLine : (214) 324-3501 | | KeelyNet * PO BOX 870716 * Mesquite, Texas * USA * 75187 | | A FREE Alternative Sciences BBS sponsored by Vanguard Sciences | | InterNet email keelynet@ix.netcom.com (Jerry Decker) | | Files also available at Bill Beaty's http://www.eskimo.com/~billb | |----------------------------------------------------------------------------| This file is from Bill Beaty's website as listed above. ------------------------------------------------------------------------------ SearchNet's Neotech Mailing List Forwarded by Glenda Stocks (1:330/201) Area : I_UFO (I_UFO) From : Chris Terraneau, To : Rich Boylan* Subj : Re: sdi weapons systems Hi Rich! RB> I would be interested in hearing more about the High Power Microwave (HPM) RB> weapon system: how it works, power output, narrow or wide beam RB> application, range, deployment status, etc. The HPM demonstrator we built consisted of basically two sections. A so-called Marx generator, which produces a very brief, very high voltage, high current pulse, and a magnetron/antenna assembly, which converts the pulse current into an intense burst of microwave energy and then directs it towards a target. The demonstrator was housed in a trailer which had its own 15kW diesel generator, and they used to tow it out to the desert to test it. The testing was done at the Cibola Range of the Yuma Proving Ground near Yuma, Arizona. A commercial 100 kV DC power supply was used to charge the 20-stage Marx, where it charged its capacitors in parallel, and then via a series of spark gaps discharged them in series. With the power supply set to 27 kV, the Marx would output a 265 kV, 3500 ampere, 21.4-nanosecond pulse. The spark gap array was pressurized with air, and the air pressure was regulated so as to control the point at which the Marx would fire. This allowed the system to operate over a range of output power levels. One megawatt was a typical pulse-power output, and with typical 50% magnetron efficiency, a half-megawatt RF pulse could be achieved. The negative-polarity output pulse from the Marx was coupled to a rather large, cold-cathode magnetron tube equipped with a superconducting magnet. The magnet was cooled to superconducting temperatures by liquid helium, and the magnetron itself was evacuated by a small vacuum pump. A specially- designed magnet power supply (1 volt, 70 amperes) was used to energize the magnet assembly. A waveguide couples the resulting microwave energy (4.4 GHz) to a 10-foot diameter dish antenna, which was mounted several feet above the trailer. Precautions were necessary around the operating equipment to protect personnel. Strong magnetic field, X-radiation from the magnetron, and RF hazard from the antenna all had to be considered. A zone of "denied occupancy" was set up in front of the antenna, which was basically a 12-degree cone which extended some 800 meters out in front of the antenna. The most intense part of the beam occupied a 6-degree angle, and in the center of the beam at a range of 30.5 meters, 9.85 watts per sq cm was developed. I never went out to the test range myself, but the guys who did told me they used to set up electronic equipment downrange, and try to destroy it. Apparently it worked great! They mentioned personal computers, and LCD wristwatches, amongst other things. If they tested it on any military electronics, I was not told specifically what type of equipment. I did hear, however, that an Army land mine was detonated at a distance of two miles. I was told by one person who had been with the company a long time, that there was a videotape floating around someplace that showed a rat inside a waveguide with a clear window on the side. The rat was then subject to ever- increasing HPM pulses, which caused him to experience (apparently) great pain, and then death. I do not know the power levels used in this experiment, and I never heard anything about this particular demonstrator being used on any humans or other biological specimens. The date of all this was 1987 to 1989. The company had some old photos of other HPM and EMP simulation equipment, which to me looked like they could have been taken in the 1960s. In approximately 1990, the company built a two-man carried portable HPM generator. One guy carried the Marx generator (sulphur hexaflouride gas insulated), high voltage supply (50kV) and battery pack on his back, and the other carried the magnetron tube and antenna. The two were connected together by a high voltage coaxial cable. Apparently, this device was a complete failure. It only produced a 300-watt output, probably due to not having a strong enough magnet on the magnetron. Since man- carrying a Dewar full of liquid helium was out of the question, they used barium-ferrite permanent magnets. I remember them taking a photograph of it before turning it over to the government sometime in 1990. As far as current deployment status, I really do not know. I do know that the Army was very pleased with the HPM demonstrator (trailer-mounted version), but shortly after all this, the HPM division of the company was sold to General Atomics Corporation, the four guys and all the equipment then being transferred there. Up to that point, it was obvious that the HPM/EMP research had been going on for many years, and it was very well funded. The huge screen rooms they had, and all the state-of-the-art analysis and data logging equipment was testimony to that. That Marx generator was truly a work of art! RB> Also, I have been shown by a retired air Force Colonel a photo of an RB> Electro-Magnetic Pulse weapon. Am also interested in power output, target RB> types, range, and deployment status. I believe one was used near Eglin RB> Air Force Base/Hurlburt Field USAF/CIA/Special Forces headquarters near RB> Mary Esther, Florida Panhandle. What do you know about Florida and New RB> Mexico sites specifically? Earlier this year, I spoke to abductee Leah Haley on the phone. She was very gracious in her information, and sent me a color Xerox of a supposed EMP weapon located on the beach at Eglin in Florida. Maybe you've heard her story of how the alien spacecraft she was in was shot down there on the beach by such a weapon. How she and her alien (and human???) captors were taken into custody by military personnel. She sneaked back there on the beach at a later time, and photographed the device. I have a couple of .GIF images of it on my BBS at (619) 635-8685. They are HALEY1.GIF and HALEY2.GIF in the misc image files area. There's also a text file, HALEY1.TXT in the misc textfiles area, which contains her story as related on Art Bell's radio program. I would be curious as to whether or not it looks like the photo you saw of such a device. I don't know too much about EMP weapons specifically. I did speak to an engineer who works for a high voltage power supply company in New Jersey a few months ago. We got into talking about some kind of high-power switch device he built specifically for EMP generation. Apparently, EMP generators (the electrical kind as opposed to the nuclear kind) also discharge a high voltage pulse via a fast switch, like a spark gap. The current pulse is delivered to an exotically-designed sort of a Tesla coil, but the device resonates at several frequencies, from a few MHz to over 100 MHz. The output from this exotic transformer is delivered to a spherical, ball-like electrode which is located in the center of a huge (30' or more?) dish antenna. He told me that the DIA discovered several years ago that EMP was the way to go as opposed to HPM, because of the wide frequency output spectrum developed by an EMP device. This means that it is much more difficult for an enemy to design their electronics to withstand a hit by EMP. HPM, on the other hand is easier to guard against, if you know the single- channel output frequency of the device. He told me that the largest EMP generator in the U.S. is located at Kirtland AFB in New Mexico. The work he did for the DIA was apparently 5-6 years ago, and his PFN (Pulse Forming Network) generated a 400-nanosecond pulse, quite a bit longer (and therefore possibly more devastating) than the 20-nsec pulse of our HPM demonstrator. He mentioned Electromagnetic Missiles were something they were developing, which used some technique called Brittingham-wave generation. Something about a paper written by a T.T. Woo of Harvard some 5-12 years ago. As far as EMP weapons at Eglin, he did confirm that is where a significant ammount of pre- deployment testing of energy weapons is done. I asked him specifically about the possibility of shooting down UFOs with such a weapon. Although he said he had no knowledge of such an application, he did believe UFOs were real, as he saw one about 30 years ago himself. He was familiar with the Biefield-Brown effect, and did indicate to me that such a weapon could likely interfere severely with the operation of such a device. On a slightly related issue, last spring I visited a sister company, who had developed some kind of adaptive-mirror telescope imaging equipment for the (get this) BMDO (Ballistic Missile Defense Organization), the keepers of the mysterious Clementine spacecraft moon mapping mission. BMDO was plastered all around this place. This telescope is basically a reflector-type, but the reflector is made up of zillions of 1/4" hexagonal segments which move rapidly under computer control. A laser beam measures atmospheric turbulence in the viewing angle of the mirror, and adjusts its many segments rapidly, so as to cancel the effects of the intervening atmosphere. The end result is that images of space rivaling those obtainable outside the atmosphere, are obtained from the ground. Now here's the clincher: The people there told me that the equipment was being tested at Eglin! And, a little model of it in a glass case in the lobby of this company looks EXACTLY like the truck-mounted dish thing in Leah Haley's photograph! The people at this company told me that the BMDO will use this telescope to accurately track and target incomming nuclear missiles, so they can shoot them down. But wait, I thought that Star Wars was cancelled! Maybe they're tracking and targeting UFOs with this device, and then shooting them down with EMP weapons. Perhaps Leah Haley's photo is only of the telescope device site, and she did not see the actual EMP weapon, which could easily be located at a different location. RB> BTW, Hurricane Opal smashed right through Eglin/Hurlburt, and even set off RB> a tornado which took out Eglin's water tower plus other damage. Gaia RB> karma? Sounds good to me! Rich, do you have a photo in your posession of the EMP device you mention? I would really like to see it. I have a copy of the Operations and Maintenance manual for the HPM demonstrator, and would be glad to mail you a copy. Please give me your address again, and I'll send it off to you. Regards, Chris ------------------------------------------------------------------------------