esaruoho's blog

Tesla in his lecture before the American Institute of Electrical Engineers at Columbia College in New York, on 20 May 1891 [3]. Tesla prepared several exciting and new experiments with the assistance of Gano Dunn. The lecture was spectacular as his experiments revealed a new world of high frequency currents and high voltages. Tesla started the lecture by saying that nature is the most captivating and most worthy subject of study and added: “Nature has stored up in the universe infinite energy.

Viktor Schauberger: "Our work is the embodiment of our will. The spiritual manifestation of this work is its effect. When such work is properly done it brings happiness, and when carried out incorrectly it assuredly brings misery. Humanity! Your will is paramount! You can command Nature if you but obey her!"

nature always operates in Resonance.

The role of water in the universe never ceases to amaze. According to this NASA press release, water is responsible for the slight wobble of the Earth's axis of rotation:

frankgermano: http://www.frank.germano.com/viktorschauberger_3.htm

There are many different periodic tables of elements. The most famous one is the Mendeleev Periodic Chart of Elements. However, Walter Russell also suggested a periodic chart of elements, so did Sir. William Crookes. Whilst not much progress has been made in combining all three together (and the recently discovered Walter Schauberger chart), there is definitely something of worth in combining them all together, in order to emerge with better knowledge of the Platonic Solids and how sacred geometry ties in with this whole process.

i've been reading Nikola Tesla (the boundary-layer bladeless turbine) and Viktor Schauberger, and would like to draw attention to a few forthcoming quotes (i have them at home - will add tomorrow - finally added ;)).

however, when going online and trying to find info, this is the kind of stuff im looking for
1) Water, is at its densest, and heaviest, at +4C. this can be verified from WikiPedia - both statements.

David Schmidt, an engineer at Massachusetts University, wanted to learn why his shower curtain wrapped itself around him when he washed. To explain this common phenomenon, he made a computer model of his bathroom that divided the shower area into 50,000 units. The software revealed that the shower spray created a vortex, and a low-pressure region at its centre sucked the shower curtain inwards. (from The Sunday Times 2005)

Wanted to make a map of places to visit, in order to better realize how far away these places and people are. Being from Finland, the obvious closest would be going to Göteborg, Sweden.

ISBN 1-892062-13-5

read this book. i should re-read it immediately.

it mentions Stephan Riess. Using this book, and Alick Bartholomew's Hidden Nature, and Living Energies by Callum Coats - you will be able to form a fuller image of what Stephan Riess achieved by drilling deep into rock fissures -- deep in the mountains there is always fresh potable water to be had, even in the desert, if you go down deep enough, you will find fresh, cold, potable drinkable water. The Stephan Riess method should be revived immediately.

174hz 285hz 396hz 417hz(A) 528hz(C) 639hz 741hz 852hz 963hz

Implosion, of course, deals with small changes in temperature, be it in water or in the human body. Altering the temperature-balance in longitudinal oscillating waves (sine/waves), eventually resulting in vortexes.

-------- 

those with strikethrough have been done :)

Frank Germano has given full permission to mirror his whole website onto merlib.

Sepp Hasslberger has given full permission to mirror his whole website onto merlib.

Hans Kutil has given permission to post pictures of his waterdropexperiment, and screenshots of his wasserwunder thing onto merlib.

Lars Johansson gave permission to mirror the "Alternativ vattenbehandling - Effekter, mekanismer och perspektiv på vattenkvalitet," -summary in english on merlib.

Callum Coats - The Life & Work of Viktor Schauberger (CFE - December 2, 1995).asf


And hello there, I'm Laura Lee, and thanks for tuning in for Conversation for Exploration.

You know, last week we were talking about Viktor Schauberger, we had a couple of guests, one that talked about the energy aspects of Schauberger's work, one that talked about the environmental and forestry aspects of Schauberger's work in water,

was apparently used by the nazis, to try and build the flying saucers, ahm, looked at water and saw a wonderful mystical substance that was living and alive, ahm, then, Callum Coats called in towards the end of the interview, and says "Oh, I'm
I just happened to be in town,  "by the way, there's a lot of stuff about Schauberger you haven't mentioned yet"
I'm going, "Oh, well, come join us, come tell us" , and he is here, right before his trip to London, to finalize his newest book on Schauberger, two books, Callum joins us in studio.

LL: Pleasure, the things you have to go through to go and meet, the researchers here, I'm glad you found me
LL: Welcome Callum.
CC: Nice to be here this evening.

keelynet has a ridiculous amount of information in its newspages.

for instance:

02/12/06 - Clem Engine - New Correlations
(Thanks to Henry Postma for these insightful correlations. - JWD) Fottinger's Fluid Drive Torque Converter - At Stettin, Germany the principle of fluid transmission of power was conceived and developed in 1905. The inventor was Dr. Herman Fottinger, who was an engineer employed by the Vulcan Engineering Company. He was working mainly on a problem of finding a suitable drive from a steam turbine to a relatively low speed propeller for ship propulsion. At that time, gears were not developed to the extent that they are today and were considered impractical. Hydrokinetic Transmission - The hydrokinetic transmission was evolved around 1905 by Dr. Fottinger . The constant filling type coupling is generally used between co-axial shafts, enables a quick start-up to motor without effect of high inertia machines. Fluid coupling acts as "non-wearing clutch"; as power is transmitted from impeller (pump) to runner (turbine) through continuous stream of oil, smoothly and shocklessly. This article provides details about the fluid couplings which is widely used in paper and pulp industry. Fluid Coupling works on the principle of ‘Cube Law’ where in torque transmitted increases with the square of the input speed and power transmitted with the cube of input speed. The Fluid coupling allows the motor to start under virtually no load, as the load characteristic during start is parabolic. The motor is loaded only with full coupling torque after reaching its maximum speed.

the re-release of an old book on magnetism: